D3 Steel Having 12 % ledeburitic chromium tool steel with great wears resistance. Basically utilized as cutting tools for sheets up to 4 mm thickness, trimming dies, blanking dies for paper and plastics, shear cutting edges and rotational shear edges for sheet thicknesses up to 2 mm.
D3 Steel having properties of High Carbon 2% and High chromium 12% tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies & tools.
Element | Fe | C | Mn | Si | Co | Cr | W | V | P | Ni | Cu | S |
Content (%) | Remaining | 2.00-2.35 | 0.6 | 0.6 | - | 11.00-13.50 | 1.00 | 1 | 0.03 | 0.3 | 0.25 | 0.03 |
This Tool Steel materials are normally available in the various forms of HCHCR D3 Round, HCHCR D3 Square and HCHCR D3 Flat. Bigger size flats are normally available in the forged form. We supply these materials as per our Customer’s cutting Requirement.
We are the Tool Steel - High Carbon Steel HCHCR D3 dealer, Tool Steel - High Carbon Steel HCHCR D3 supplier, Tool Steel - High Carbon Steel HCHCR D3 stockist and Tool Steel - High Carbon Steel HCHCR D3 trader for the following cities Chennai, Coimbatore, Chengalpattu, Madurai, Tiruchirappalli, Salem, Tirunelveli, Tiruppur, Tiruvallur, Vellore, Erode, Thoothukkudi, Dindigul, Thanjavur, Ranipet, Sivakasi, Karur, Namakkal, Nilgiris, Ramanathapuram, Theni, Tuticorin, Udhagamandalam, Hosur, Nagercoil, Kanchipuram, Kumarapalayam, Karaikkudi, Viluppuram, Virudhunagar, Neyveli, Cuddalore, Kumbakonam, Tiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukkottai, Vaniyambadi, Ambur & Nagapattinam
Tool Steel - High Carbon Steel HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.