Tool Steel - High Carbon Steel HCHCR D3
D3 steel Tool steel with 12% ledeburitic chromium and excellent wear resistance. Essentially used as cutting tools for sheets up to 4 mm thick, trimming dies, blanking dies for paper and plastics, shear cutting edges, and rotational shear edges for sheet thicknesses up to 2 mm.
D3 steel is a high carbon 2% and high chromium 12% tool steel with excellent wear resistance. Its supply condition is generally annealed for easy machining, with a suggested hardness of 57-58 HRC once dies and tools are made.
Stock Availability of Tool Steel - High Carbon Steel HCHCR D3
This Tool Steel materials are normally available in the various forms of HCHCR D3 Round, HCHCR D3 Square and HCHCR D3 Flat. Bigger size flats are normally available in the forged form. We supply these materials as per our Customer’s cutting Requirement.
Dealer of Tool Steel - High Carbon Steel HCHCR D3
We are the Tool Steel - High Carbon Steel HCHCR D3 dealer, Tool Steel - High Carbon Steel HCHCR D3 supplier, Tool Steel - High Carbon Steel HCHCR D3 stockist and Tool Steel - High Carbon Steel HCHCR D3 trader for the following cities Chennai, Coimbatore, Chengalpattu, Madurai, Tiruchirappalli, Salem, Tirunelveli, Tiruppur, Tiruvallur, Vellore, Erode, Thoothukkudi, Dindigul, Thanjavur, Ranipet, Sivakasi, Karur, Namakkal, Nilgiris, Ramanathapuram, Theni, Tuticorin, Udhagamandalam, Hosur, Nagercoil, Kanchipuram, Kumarapalayam, Karaikkudi, Viluppuram, Virudhunagar, Neyveli, Cuddalore, Kumbakonam, Tiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukkottai, Vaniyambadi, Ambur & Nagapattinam
Applications of Tool Steel - High Carbon Steel HCHCR D3
Tool Steel - High Carbon Steel HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.
Chemical Composition
| Element | Fe | C | Mn | Si | Co | Cr | W | V | P | Ni | Cu | S |
| Content (%) | Remaining | 2.00-2.35 | 0.6 | 0.6 | - | 11.00-13.50 | 1.00 | 1 | 0.03 | 0.3 | 0.25 | 0.03 |
