Tool Steel - High Carbon Steel HCHCR D2
Tool Steel is a type of high carbon steel known as HCHCR D2. It is specifically designed to provide maximum resistance to wear, exceptional durability, and excellent maintenance capabilities. This steel can also undergo nitriding after undergoing special heat treatment. HCHCR-D2 steel falls under the category of Cold Work Tool Steel and contains high amounts of carbon and chromium.
One of the distinguishing features of this steel is its addition of vanadium, which enhances its wear resistance and toughness properties. With a hardness reaching up to 57-59 HRC, D2 materials offer superior performance compared to D3 due to their higher alloy properties.
Stock Availability of Tool Steel - High Carbon Steel HCHCR D2
This Tool Steel materials are normally available in the various forms of HCHCR D2 Round, HCHCR D2 Square and HCHCR D2 Flat. We supply these materials as per our Customer’s cutting Requirement.
Dealer of Tool Steel - High Carbon Steel HCHCR D2
We are the Tool Steel - High Carbon Steel HCHCR D2 dealer, Tool Steel - High Carbon Steel HCHCR D2 supplier, Tool Steel - High Carbon Steel HCHCR D2 stockist and Tool Steel - High Carbon Steel HCHCR D2 trader for the following cities Chennai, Coimbatore, Chengalpattu, Madurai, Tiruchirappalli, Salem, Tirunelveli, Tiruppur, Tiruvallur, Vellore, Erode, Thoothukkudi, Dindigul, Thanjavur, Ranipet, Sivakasi, Karur, Namakkal, Nilgiris, Ramanathapuram, Theni, Tuticorin, Udhagamandalam, Hosur, Nagercoil, Kanchipuram, Kumarapalayam, Karaikkudi, Viluppuram, Virudhunagar, Neyveli, Cuddalore, Kumbakonam, Tiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukkottai, Vaniyambadi, Ambur & Nagapattinam
Applications of Tool Steel - High Carbon Steel HCHCR D2
Tool Steel - High Carbon Steel HCHCR D2 applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting dies , stamping tools etc. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thicknesses up to 6 mm. Used as shearing blades for sheet thicknesses up to 12 mm.
Chemical Composition
| Element | Fe | C | Mn | Si | Co | Cr | Mo | V | P | Ni | Cu | S |
| Content (%) | Remaining | 1.40-1.60 | 0.6 | 0.6 | 1 | 11.00-13.00 | 0.70-1.20 | 1.1 | 0.03 | 0.3 | 0.25 | 0.03 |
